Main body components made of cast steel ASTM A216 WCB
Female BSPT taper threaded ends to DIN 2999 (3" Inlet x 2" Outlet)
1" NB Threaded motive medium inlet, for use with saturated steam
1" NB Threaded pump exhaust outlet
Built-in stainless steel steam trap
Built-in CK3MG stainless check valves on pumped medium inlet & outlet (not shown)
Can handle high-temperature steam condensate without cavitation
No electrical supply or additional controls required making the GT14 intrinsically safe
Pump will operate with a low filling-head (Minimum: 710mm)
Durable nickel-based alloy compression coil spring
High quality stainless steel internals with inline access guarantee easy cleaning and maintenance as well as a long service life
Ideal for a range of applications such as drainage of heat exchangers, flash steam recovery systems and non-vented receivers such as low-pressure stages of turbines or absorption chillers, often operating under vacuum conditions
Pump discharge capacity: Up to approx. 5500kg/h
Steam consumption: Up to 6kg per tonne pumped
Maximum operating pressure: 13 bar
Maximum operating temperature: 200°C
General | |
Valve Type | Condensate Recovery Pump |
Size | 3" (80mm) x 2" (50mm) Nominal Bore |
Connections | Female BSPT Taper Threaded (DIN 2999) |
Materials | |
Body | Cast Steel A216 |
Float | Stainless Steel 316 |
Steam Trap | Stainless Steel |
Seals | |
Body Gasket | Graphite Compound |
Pressure/Temperature Ratings | |
Maximum Operating Pressure | 14 bar |
Motive Medium Pressure Range | 0.3 - 14 bar |
Operating Temperature Range | 0°C - 200°C |
Maximum Discharge Capacity | Up to 5500kg/h |
Approvals | |
Quality | CE Marked. |
Safety | Pressure Equipment Directive (PED) 2014/68/EU Compliant |
Other | |
Additional Information | 1" BSP Motive medium inlet & exhaust outlet. Built-in steam trap, built-in check valves on condensate inlet & outlet. Intrinsically safe. Can operate with low filling head. |
Certification Availability | Contact Us (Chargeable, may increase delivery time.) |