Main body elements made of cast iron FC250
Female BSPT taper threaded ends to DIN 2999 on pumped medium inlet & outlet ports
1/2" NB BSP threaded motive medium inlet port, for use with saturated steam
3/8" NB BSP threaded pump exhaust port/outlet
Compact pump design allowing for installation in confined spaces
Built-in stainless steel check valves on pumped medium inlet & outlet ports
Built-in stainless steel steam trap
Can handle high-temperature steam condensate without cavitation
No electrical supply or additional controls required making the GT5C intrinsically safe
Pump will operate with a an extremely low filling-head (Minimum: 155mm)
No pipework required for outlet/exhaust port, reduces installation time
High quality stainless steel internals with inline access guarantee easy cleaning and maintenance as well as a long service life
Ideal for use on small heat exchanger or steam/air heaters often operating under stall conditions
Pump discharge capacity: Up to approx. 125 kg/h
Maximum operating pressure: 5 bar
Maximum operating temperature: 185°C
General | |
Valve Type | Condensate Recovery Pump |
Size | 1" (25mm) Nominal Bore |
Connections | Female BSPT Taper Threaded (DIN 2999) |
Materials | |
Body | Cast Iron FC250 |
Float | Stainless Steel 316 |
Seals | |
Body Gasket | Flourine Resin PTFE |
Pressure/Temperature Ratings | |
Maximum Operating Pressure | 5 bar |
Motive Medium Pressure Range | 0.3 - 5 bar |
Operating Temperature Range | 0°C - 185°C |
Maximum Discharge Capacity | Up to 125kg/h |
Other | |
Additional Information | 1/2" BSP Motive medium inlet & 3/8" exhaust outlet. Built-in steam trap, built-in check valves on condensate inlet & outlet. Intrinsically safe. Can operate with low filling head. |
Certification Availability | Contact Us (Chargeable, may increase delivery time.) |