Main body elements made of cast iron FC250
Female BSPT taper threaded ends to DIN 2999 on inlet & outlet for pumped medium
1/2" BSP threaded motive inlet, for use with saturated steam
1/2" BSP threaded pump exhaust port/outlet
Compact pump design allows for installation in confined spaces
Built-in stainless steel steam trap
Built-in CK3MG stainless steel check valves on inlet & outlet ports for pumped medium
Can handle high-temperature steam condensate without cavitation
No electrical supply or additional controls required making the GT10L intrinsically safe
Pump will operate with a low filling-head (Minimum: 450mm)
High quality stainless steel internals with inline access guarantee easy cleaning and maintenance as well as a long service life
Ideal for a range of applications including drainage of heat exchangers, flash steam recovery systems and reservoirs, often operating under vacuum conditions
Pump discharge capacity: Up to approx. 1100 kg/h (1.1 t/h)
Maximum operating pressure (motive): 10.5 bar
Maximum operating temperature: 185°C
General | |
Valve Type | Condensate Recovery Pump |
Size | 1 1/2" (40mm) x 1" (25mm) Nominal Bore |
Connections | Female BSPT Taper Threaded (DIN 2999) |
Materials | |
Body | Cast Iron FC250 |
Float | Stainless Steel 316 |
Steam Trap | Stainless Steel |
Seals | |
Body Gasket | Graphite Compound |
Pressure/Temperature Ratings | |
Maximum Operating Pressure | 10.5 bar |
Motive Medium Pressure Range | 0.3 - 10.5 bar |
Operating Temperature Range | 0°C - 185°C |
Maximum Discharge Capacity | Up to 1400kg/h |
Approvals | |
Quality | CE Marked. |
Safety | Pressure Equipment Directive (PED) 2014/68/EU Compliant |
Other | |
Additional Information | 1/2" BSP Motive medium inlet & exhaust outlet. Built-in steam trap, built-in check valves on condensate inlet & outlet. Intrinsically safe. Can operate with low filling head. |
Certification Availability | Contact Us (Chargeable, may increase delivery time.) |