Manual lever operated ball valve with a full interior bore
2-Piece valve body made of painted ductile cast iron EN-GJS-400 (GGG-40)
PN16 Flanged ends conforming to BS EN 1092-1:2018
Ball made of polished stainless steel 1.4308 with PTFE & graphite ball seats/seals
Valve body and cap secured with stainless steel 304 nuts and bolts, sealed with an PTFE body gasket
Blow-out proof stem made of stainless steel 304 with PTFE stem packing and an FKM O-ring
Face to face flange dimensions conforming to BS EN 558 (series 27)
4 x M12 (12mm) bolt holes
Flange diameter: 105mm
Flange pitch circle diameter (PCD): 75mm
ISO 5211 direct mount plate for installation of an actuator (F03/F04 x 9mm)
Valve torque at zero pressure: 8Nm
Built-in carbon steel locking lever with vinyl sleeve
Maximum operating pressure: 16 bar (PN16) at up to 175°C
Operating temperature range: -30°C - 180°C
General | |
Valve Type | 2-Piece Full Bore Ball Valve |
Size | 3/4" (DN20) |
Connections | PN16 Flanged Ends - BS EN 1092-1 |
Operation | Manual Locking Lever Operated |
Materials | |
Body | Ductile Iron EN-GJS-400 (Painted) |
Ball | Stainless Steel 1.4308 (Polished) |
Stem | Stainless Steel 304 |
Handle | Carbon Steel (Zinc Plated) |
Seals | |
Body Gasket | PTFE |
Ball Seats | PTFE + 15% Graphite |
Stem Packing | PTFE |
Dimensions | |
Flange Diameter | 105mm |
Flange PCD | 75mm |
Flange Bolt Holes | 4 x M12 |
ISO 5211 Direct Mount | F03/F04 x 9mm |
Pressure/Temperature Ratings | |
Maximum Operating Pressure | 16 bar |
Operating Temperature Range | -30°C - 180°C |
Other | |
Additional Information | Blow-out proof stem. Dimensions to BS EN 558 series 27. Valve torque at zero pressure 8Nm. |
Certification Availability | N/A |