End rings & flange adapter body in ductile iron (EN-GJS-450-10) to BS EN 1563
Centre sleeve in S275 mild steel to BS EN 10025
Black Rilsan (Nylon 11) coated for improved resistance to chemicals, abrasion & impact
For 90mm OD (outer diameter) SDR11 & SDR17 PE (polyethylene) pipe with plain ends
Drillings for 3" (DN80) PN10/16 pipe flanges to BS EN 1092-1
EPDM rubber gasket
4x M12 Steel nuts, bolts (115mm Length) & washers with Sheraplex coating
Same size bolts across range with a single torque setting: 55 - 65Nm
Includes mild steel liner for PE pipe/tube
Can be used on pipe without machine ends or precision cuts
No special skills or tools required, just a suitable torque wrench
WRAS approved for use on potable water
End load gripping capability meets WIS 4-24-01 (Type 1) performance requirements
Meets requirements of Water Supply Regulations 1999 (England & Wales), Water Byelaws 2000 (Scotland) & Water Regulations (NI)
Maximum operating pressure: 16 bar (PN16)
Operating temperature range: -10°C - 40°C
General | |
Fitting Type | Flange Adapter |
Size | 90mm x 3" |
Flange Classes | PN10/PN16 |
Materials | |
Body | EN GJS-450-10 Ductile Iron (Black Rilsan Coated) |
Centre Sleeve | S275 Mild Steel |
Seals | |
O-Rings | EPDM Rubber |
Pressure/Temperature Ratings | |
Maximum Operating Pressure | 16 bar |
Operating Temperature Range | -10°C - 40°C |
Approvals | |
Potable Water | WRAS Approved. Meets English, Welsh, Scottish & NI Water Regulations. |
Other | |
Additional Information | M12 Bolts, recommended torque 55 - 65Nm. |
Certification Availability | N/A |