Universal pipe coupling with a wide tolerance range to suit pipe in many materials, ideal for pipe repair applications
Adapter body & ends rings in ductile iron (EN GJS-450-10) to BS EN 1563
Black Rilsan (nylon 11) coated for impact, abrasion, weathering and chemical resistance
Suitable for cast iron, ductile iron, steel, plastic, cement and other types of plain ended pipe with a 47.9mm - 59.5mm OD (outer diameter)
Ribbed EPDM rubber gaskets ensure a strong seal on scored, corroded or pitted pipe
Captive, non-rotating steel bolt heads require a 19mm spanner for installation. Standard bolt torque (55 - 65Nm) for all sizes
2x M12 steel nuts, bolts (180mm length) & washers
Sleeve length & thickness: 100mm x 4.5mm
Setting gap range: 20mm - 40mm
Allows angular deflection (up to 6°) between pipes to accommodate for normal pipeline movement
Conforms to BS EN 14525, meets the requirements of the UK Water Regulations
Maximum operating pressure: 16 bar (PN16)
Operating temperature range: -40°C - 90°C
General | |
Fitting Type | Pipe Coupling |
Size | 40mm |
Manufacturing Standard | BS EN 14525 |
Materials | |
Body | EN GJS-450-10 Ductile Iron (Black Rilsan Coated) |
Seals | |
O-Rings | EPDM Rubber |
Pressure/Temperature Ratings | |
Maximum Operating Pressure | 16 bar (Gas = 6 bar) |
Operating Temperature Range | -40°C - 90°C |
Approvals | |
Potable Water | Meets UK Water Regulations |
Other | |
Additional Information | Allows angular deflection. M12 Bolts, recommended torque 55 - 65Nm. |
Certification Availability | 2.1 Letter of Conformity Only - Must be requested at time of order |