Centre sleeve & end rings made of mild steel (S275JR) to BS EN 10025-2
Coated in black Rilsan (nylon 11) for increased resistance to impact, corrosion, abrasion & chemical
For used with plain ended ductile iron pipe with a 480mm OD (outer diameter)
EPDM Rubber gaskets
Setting gap: 25mm - 50mm
Sleeve type: L02/standard (150mm length)
8 x M12 steel bolts (235mm length), nuts & stainless steel washers
Bolt tightening torque: 55 - 65Nm
Allows up to 6° of angular deflection between pipes to accommodate for normal pipeline movement
Can accommodate expansion/contraction (up to 10mm) allowing movement and eliminating the need for expansion joints in most cases
Maximum operating pressure: 23.1 bar
General | |
Fitting Type | Pipe Coupling |
Size | 480mm |
Materials | |
Body | S275JR Mild Steel (Black Rilsan Coated) |
Seals | |
O-Rings | EPDM Rubber |
Pressure/Temperature Ratings | |
Maximum Operating Pressure | 23.1 bar |
Other | |
Additional Information | Allows angular deflection. M12 Bolts, recommended torque 55 - 65Nm. |
Certification Availability | N/A |