Your shopping cart is empty!
Allows threaded rod and other pipe support materials to be secured to the flange of steel girders, I-beams or RSJs
Made of cast iron with a galvanised finish
7mm hole for use with M6 threaded rod
Plain hole, retaining nuts should be used to secure threaded rod
Maximum flange thickness: 18mm
Set screw must be tightened to the correct torque (14Nm) on the sloped side of the I-beam
Maximum hanging load: 1200N
General | |
Fitting Type | Beam Clamp |
Size | M6 |
Materials | |
Body | Galvanised Cast Iron |
Pressure/Temperature Ratings | |
Maximum Hanging Load | 1.2kN |
Other | |
Certification Availability | N/A |