Wide tolerance pipe x flange adapter to suit pipe in many materials
Suitable for cast iron, ductile iron, steel, plastic, cement and other types of plain ended pipe with a 467mm - 484mm OD (outer diameter)
Flange drillings to suit PN16 flanges to BS EN 1092-1
Adapter body & ends rings in rolled mild steel (S275) to BS EN 10025-2
Black Rilsan (nylon 11) coated for impact, abrasion, weathering and chemical resistance
Ribbed EPDM rubber gasket ensures a strong seal on scored, corroded or pitted pipe
Captive, non-rotating steel bolt heads require a 19mm spanner for installation. Standard bolt torque (55 - 65Nm) for all sizes
10x M12 steel nuts, bolts (290mm length) & stainless steel washers
Allows angular deflection (up to 3°) between the pipe and flange to accommodate for normal pipeline movement
Conforms to BS EN 14525, meets the requirements of the UK Water Regulations
Maximum operating pressure: 16 bar (PN16)
Operating temperature range: -40°C - 90°C
General | |
Fitting Type | Flange Adapter |
Size | 450mm |
Flange Classes | PN16 |
Materials | |
Body | S275 Rolled Steel (Black Rilsan Coated) |
Seals | |
O-Rings | EPDM Rubber |
Pressure/Temperature Ratings | |
Maximum Operating Pressure | 16 bar (Gas = 6 bar) |
Operating Temperature Range | -40°C - 90°C |
Other | |
Additional Information | Allows angular deflection. M12 Bolts, recommended torque 55 - 65Nm. |
Certification Availability | N/A |