Categories
Steel Pipe & Tube Threaded Pipe Fittings Welding Pipe Fittings Flanges Galvanised Handrail System Press Fittings TLV Steam Products Valves Actuated Valves Plastic Pipe & Fittings Copper Tube & Fittings Grooved Couplings & Fittings Ancillaries Viking Johnson Pipe Clamps EQOair Aluminium Compressed Air System Camlock Couplings Products by Brand

250mm Viking Johnson MaxiDaptor PN16 Flange Adapter

250mm Viking Johnson MaxiDaptor PN16 Flange Adapter
Brand: Viking Johnson
Product Code: 4502250
Availability: In Stock
Price: £213.78
Qty: - +  

250mm Viking Johnson MaxiDaptor Ductile Iron PN16 Flange Adapter (266mm - 295mm) - View Datasheet


Wide tolerance pipe x flange adapter to suit pipe in many materials

Suitable for cast iron, ductile iron, steel, plastic, cement and other types of plain ended pipe with a 266mm - 295mm OD (outer diameter)

Flange drillings to suit BS EN 1092-1 pipe flanges

Adapter body & ends rings in ductile iron (EN GJS-450-10) to BS EN 1563

Black Rilsan (nylon 11) coated for impact, abrasion, weathering and chemical resistance

Ribbed EPDM rubber gasket ensures a strong seal on scored, corroded or pitted pipe

Captive, non-rotating steel bolt heads require a 19mm spanner for installation. Standard bolt torque (55 - 65Nm) for all sizes

6x M12 steel nuts, bolts (135mm length) & washers

Sleeve length & thickness: 85mm x 5mm

Setting gap range: 25mm - 50mm

Allows angular deflection (up to 3°) between the pipe and flange to accommodate for normal pipeline movement

Conforms to BS EN 14525, meets the requirements of the UK Water Regulations

Maximum operating pressure: 16 bar (PN16)

Operating temperature range: -40°C - 90°C

General
Fitting Type Flange Adapter
Size 250mm
Manufacturing Standard BS EN 14525
Flange Classes See Datasheet
Materials
Body EN GJS-450-10 Ductile Iron (Black Rilsan Coated)
Seals
O-Rings EPDM Rubber
Pressure/Temperature Ratings
Maximum Operating Pressure 16 bar (Gas = 6 bar)
Operating Temperature Range -40°C - 90°C
Approvals
Potable Water Meets UK Water Regulations
Other
Additional Information Allows angular deflection. M12 Bolts, recommended torque 55 - 65Nm.
Certification Availability 2.1 Letter of Conformity Only - Must be requested at time of order
Register today for access to our extensive product range Register