Adapter body & ends rings in ductile iron (EN GJS-450-10) to BS EN 1563
Black Rilsan (nylon 11) coated for impact, abrasion, weathering and chemical resistance
Suitable for plain ended ductile iron pipe with a 274mm OD (outer diameter)
EPDM rubber gaskets with load-bearing stainless steel teeth
Captive, non-rotating steel bolt heads require a 24mm spanner for installation. Standard bolt torque (95 - 120Nm)
12x M16 steel nuts, bolts (275mm length) & washers
Sleeve length & thickness: 178mm x 8.5mm
Setting gap range: 20mm - 40mm
Allows angular deflection (up to 6°) between pipes to accommodate for normal pipeline movement
Can restrain pressure thrusts at bends without the need for thrust blocks
Maximum operating pressure: 10 bar (PN10)
Operating temperature range: -40°C - 40°C
General | |
Fitting Type | Pipe Coupling |
Size | 10" (For 274mm OD Ductile Iron Pipe) |
Materials | |
Body | EN GJS-450-10 Ductile Iron (Black Rilsan Coated) |
Seals | |
O-Rings | EPDM Rubber (With Stainless Steel Teeth) |
Pressure/Temperature Ratings | |
Maximum Operating Pressure | 10 bar (Gas = 6 bar) |
Operating Temperature Range | -40°C - 40°C |
Other | |
Additional Information | Allows angular deflection. M12 Bolts, recommended torque 95 - 120Nm. |
Certification Availability | N/A |