Categories
Steel Pipe & Tube Threaded Pipe Fittings Welding Pipe Fittings Flanges Galvanised Handrail System Press Fittings TLV Steam Products Valves Actuated Valves Plastic Pipe & Fittings Copper Tube & Fittings Grooved Couplings & Fittings Ancillaries Viking Johnson Pipe Clamps EQOair Aluminium Compressed Air System Camlock Couplings Products by Brand

480mm x 18" Viking Johnson Dedicated PN16 Flange Adapter

480mm x 18" Viking Johnson Dedicated PN16 Flange Adapter
Brand: Viking Johnson
Product Code: 4508480
Availability: In Stock
Price: £1,137.69
Qty: - +  

480mm x 18" Viking Johnson Dedicated Mild Steel Large Diameter PN16 Flange Adapter - View Datasheet


Centre sleeve & end ring and flange adapter made of mild steel (S275JR) to BS EN 10025-2

Coated in black Rilsan (nylon 11) for increased resistance to impact, corrosion, abrasion & chemical

Drillings for 18" PN16 pipe flanges to BS EN 1092-1

For used with plain ended ductile iron pipe with a 480mm OD (outer diameter)

EPDM Rubber gasket

Setting gap: 25mm - 50mm

Sleeve type: L02/standard (73mm length)

10 x M12 steel bolts (235mm length), nuts & stainless steel washers

Bolt tightening torque: 55 - 65Nm

Flange bolt holes: 20 x M27

Allows up to 3° of angular deflection between pipes to accommodate for normal pipeline movement

Can accommodate expansion/contraction (up to 5mm) allowing movement and eliminating the need for expansion joints in most cases

Maximum operating pressure: 16 bar (PN16)

General
Fitting Type Flange Adapter
Size 480mm x 18"
Flange Classes PN16
Materials
Body S275JR Mild Steel (Black Rilsan Coated)
Seals
O-Rings EPDM Rubber
Dimensions
Flange Bolt Holes 20 x M27
Pressure/Temperature Ratings
Maximum Operating Pressure 16 bar
Other
Additional Information Allows angular deflection. M12 Bolts, recommended torque 55 - 65Nm.
Certification Availability N/A
Register today for access to our extensive product range Register