Centre sleeve & end ring and flange adapter made of mild steel (S275JR) to BS EN 10025-2
Coated in black Rilsan (nylon 11) for increased resistance to impact, corrosion, abrasion & chemical
Drillings for 16" PN16 pipe flanges to BS EN 1092-1
For used with plain ended ductile iron pipe with a 429mm OD (outer diameter)
EPDM Rubber gasket
Setting gap: 25mm - 50mm
Sleeve type: L02/standard (73mm length)
8 x M12 steel bolts (235mm length), nuts & stainless steel washers
Bolt tightening torque: 55 - 65Nm
Flange bolt holes: 16 x M27
Allows up to 3° of angular deflection between pipes to accommodate for normal pipeline movement
Can accommodate expansion/contraction (up to 5mm) allowing movement and eliminating the need for expansion joints in most cases
Maximum operating pressure: 16 bar (PN16)
General | |
Fitting Type | Flange Adapter |
Size | 429mm x 16" |
Flange Classes | PN16 |
Materials | |
Body | S275JR Mild Steel (Black Rilsan Coated) |
Seals | |
O-Rings | EPDM Rubber |
Dimensions | |
Flange Bolt Holes | 16 x M27 |
Pressure/Temperature Ratings | |
Maximum Operating Pressure | 16 bar |
Other | |
Additional Information | Allows angular deflection. M12 Bolts, recommended torque 55 - 65Nm. |
Certification Availability | N/A |