Categories
Steel Pipe & Tube Threaded Pipe Fittings Welding Pipe Fittings Flanges Galvanised Handrail System Press Fittings TLV Steam Products Valves Actuated Valves Plastic Pipe & Fittings Copper Tube & Fittings Grooved Couplings & Fittings Ancillaries Viking Johnson Pipe Clamps EQOair Aluminium Compressed Air System Camlock Couplings Products by Brand

180mm x 6" Viking Johnson AquaGrip PN16 Flange Adapter

180mm x 6" Viking Johnson AquaGrip PN16 Flange Adapter
Brand: Viking Johnson
Product Code: 4511180
Availability: In Stock
Price: £433.47
Qty: - +  

180mm x 6" Viking Johnson AquaGrip PN16 Flange Adapter - View Datasheet


End rings & flange adapter body in ductile iron (EN-GJS-450-10) to BS EN 1563

Centre sleeve in S275 mild steel to BS EN 10025

Black Rilsan (Nylon 11) coated for improved resistance to chemicals, abrasion & impact

For 180mm OD (outer diameter) SDR11 & SDR17 PE (polyethylene) pipe with plain ends

Drillings for 6" (DN150) PN10/16 pipe flanges to BS EN 1092-1

EPDM rubber gasket

8x M12 Steel nuts, bolts (115mm Length) & washers with Sheraplex coating

Same size bolts across range with a single torque setting: 55 - 65Nm

Includes mild steel liner for PE pipe/tube

Can be used on pipe without machine ends or precision cuts

No special skills or tools required, just a suitable torque wrench

WRAS approved for use on potable water

End load gripping capability meets WIS 4-24-01 (Type 1) performance requirements

Meets requirements of Water Supply Regulations 1999 (England & Wales), Water Byelaws 2000 (Scotland) & Water Regulations (NI)

Maximum operating pressure: 16 bar (PN16)

Operating temperature range: -10°C - 40°C

General
Fitting Type Flange Adapter
Size 180mm x 6"
Flange Classes PN10/PN16
Materials
Body EN GJS-450-10 Ductile Iron (Black Rilsan Coated)
Centre Sleeve S275 Mild Steel
Seals
O-Rings EPDM Rubber
Pressure/Temperature Ratings
Maximum Operating Pressure 16 bar
Operating Temperature Range -10°C - 40°C
Approvals
Potable Water WRAS Approved. Meets English, Welsh, Scottish & NI Water Regulations.
Other
Additional Information M12 Bolts, recommended torque 55 - 65Nm.
Certification Availability N/A
Register today for access to our extensive product range Register