180 Degree Return Bends

HDG galvanised malleable iron 180 degree return bends are available here in sizes 1/2" (15mm) - 2" (50mm) NB, all of these cast malleable iron bends have been manufactured by Jinan Meide to the BS EN 10242:1995 standard. Hot-dip galvanised pipe fittings all come with female BSP taper threaded ends to ISO 7-1 and bear the BSI Kitemark, they’re also 25 bar (PN25) pressure rated at up to 120°C.

Malleable iron return bends have a full operating temperature range of -20°C - 300°C and are often used with BS EN 10255 steel tube on installations handling unleaded fuels, compressed air or non-potable water.

1/2" Galvanised Malleable Iron 180 Degree Return Bend

1/2" NB Jinan Meide Galvanised Malleable Iron 180 Degree Return BendPipe fitting cast in HDG galvani..

£24.99

Qty

3/4" Galvanised Malleable Iron 180 Degree Return Bend

3/4" NB Jinan Meide Galvanised Malleable Iron 180 Degree Return BendPipe fitting cast in HDG galvani..

£40.41

Qty

1" Galvanised Malleable Iron 180 Degree Return Bend

1" NB Jinan Meide Galvanised Malleable Iron 180 Degree Return BendPipe fitting cast in HDG galvanise..

£50.39

Qty

1 1/4" Galvanised Malleable Iron 180 Degree Return Bend

1 1/4" NB Jinan Meide Galvanised Malleable Iron 180 Degree Return BendPipe fitting cast in HDG galva..

£65.37

Qty

1 1/2" Galvanised Malleable Iron 180 Degree Return Bend

1 1/2" NB Jinan Meide Galvanised Malleable Iron 180 Degree Return BendPipe fitting cast in HDG galva..

£88.52

Qty

2" Galvanised Malleable Iron 180 Degree Return Bend

2" NB Jinan Meide Galvanised Malleable Iron 180 Degree Return BendPipe fitting cast in HDG galvanise..

£135.09

Qty

Showing 1 to 6 of 6 (1 Pages)

Shopping Cart

180 Degree Return Bends

Information

Customer Service

Extras

My Account