C04 Long Tee

The C04 long tee from FastClamp is available in sizes between 3/4" (20mm) and 2" (50mm) nominal bore, these HDG galvanised handrail fittings are all manufactured to the BS EN 1562:2012 standard and made of cast malleable iron. These handrail fittings are most often used with medium wall steel tube to BS EN 10255, they're also quick to install and require so specialised tools.

FastClamp C04 tees, as you'd expect, are used to create a tee joint between two or three handrail tubes of the same diameter at right angles to each other, often top rails and a horizontal support rail. These handrail fittings are often used for railing ends and tops, they also allow the through tube to be joined inside the fitting. The C03 is a viable alternative if the through tube does not need to be joined within the fitting.